ABB 2TLA Series Twist Release Emergency Stop Push Button, Surface Mount, 1NC, IP65
Tehnička dokumentacija
Tehnički podaci
Proizvođač
ABBMounting Type
Surface Mount
Contact Configuration
1NC
Push Button Actuation
Twist Release
Illuminated
No
Series
2TLA
IP Rating
IP65
Boja
Red
Push Button Shape
Round
Voltage Rating
24V dc
Depth
52mm
Auxiliary Contacts
NO
Height
84mm
Housing Colour
Yellow
Push Button Material
Plastic
Bezel Material
Plastic
Detalji o proizvodu
Smile Tina E-Stop for Vital/Pluto
Smile Tina from ABB is very easy to install, especially on aluminium extrusions. There are three different versions available, either with one or two M12 connections or cable. Two M12 connectors are used to enable the connection of E-stops in series, which is often used with dynamic safety circuits fulfilling safety category 4. On the top of the Smile Tina E-stop unit, an LED indicates the actual status according to the dynamic system. Smile Tina from ABB is intended for use in safety circuits in accordance with EN 60204-1.
Approvals
CE, TUV
Standards
EN ISO 12100-1, EN ISO 12100-2, EN 60204-1, EN 954-1, EN ISO 13849-1, EN 62061, IEC 60947-5-1
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 182,00
komadno (bez PDV-a)
€ 227,50
komadno (s PDV-om)
1
€ 182,00
komadno (bez PDV-a)
€ 227,50
komadno (s PDV-om)
1
Kupujte na veliko
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 182,00 |
| 5 - 9 | € 175,00 |
| 10 - 24 | € 173,00 |
| 25 - 49 | € 170,00 |
| 50+ | € 167,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
ABBMounting Type
Surface Mount
Contact Configuration
1NC
Push Button Actuation
Twist Release
Illuminated
No
Series
2TLA
IP Rating
IP65
Boja
Red
Push Button Shape
Round
Voltage Rating
24V dc
Depth
52mm
Auxiliary Contacts
NO
Height
84mm
Housing Colour
Yellow
Push Button Material
Plastic
Bezel Material
Plastic
Detalji o proizvodu
Smile Tina E-Stop for Vital/Pluto
Smile Tina from ABB is very easy to install, especially on aluminium extrusions. There are three different versions available, either with one or two M12 connections or cable. Two M12 connectors are used to enable the connection of E-stops in series, which is often used with dynamic safety circuits fulfilling safety category 4. On the top of the Smile Tina E-stop unit, an LED indicates the actual status according to the dynamic system. Smile Tina from ABB is intended for use in safety circuits in accordance with EN 60204-1.
Approvals
CE, TUV
Standards
EN ISO 12100-1, EN ISO 12100-2, EN 60204-1, EN 954-1, EN ISO 13849-1, EN 62061, IEC 60947-5-1