TE Connectivity Red Polyolefin Solder Sleeve 42mm Length 1.3 → 2.7mm Cable Diameter

RS kataloški broj:: 136-2080robna marka: TE ConnectivityProizvođački broj:: B-155-9002
brand-logo
Prikaži sve u Solder Sleeves

Tehnička dokumentacija

Tehnički podaci

Proizvođač

TE Connectivity

Minimum Cable Diameter

1.3mm

Maximum Cable Diameter

2.7mm

Sleeve Length

42mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

2

Boja

Red

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Shrink Temperature

+85°C

Zemlja podrijetla

Mexico

Detalji o proizvodu

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

€ 138,00

1 kutija od 100 (bez PDV-a)

€ 172,50

1 kutija od 100 (s PDV-om)

TE Connectivity Red Polyolefin Solder Sleeve 42mm Length 1.3 → 2.7mm Cable Diameter

€ 138,00

1 kutija od 100 (bez PDV-a)

€ 172,50

1 kutija od 100 (s PDV-om)

TE Connectivity Red Polyolefin Solder Sleeve 42mm Length 1.3 → 2.7mm Cable Diameter
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Proizvođač

TE Connectivity

Minimum Cable Diameter

1.3mm

Maximum Cable Diameter

2.7mm

Sleeve Length

42mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

2

Boja

Red

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Shrink Temperature

+85°C

Zemlja podrijetla

Mexico

Detalji o proizvodu

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.