Nexperia PMD3001D,115, MOSFET 1, 40V 6-Pin, TSOP

RS kataloški broj:: 509-796brend: NexperiaProizvođački broj:: PMD3001D,115
Prikaži sve u Gate Drivers

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

China

Detalji o proizvodu

LKM 281 Digital Programmable Measuring Transducer

The LKM 281 series is a digital programmable galvanically isolated measuring transducer for thermocouples. The transducer is mounted on standard rails and is designed in three wire. The LKM 281 transducer was designed to be used in cars. The transducer has a high interference immunity plus a wide range of voltages even a supply voltage of 8V you can obtain a liner output signal of 20 mA. A slim 6mm design means this transducer takes little space on a standard rail and has optimum shock resistance.
An added benefit to all users is that this measuring transducer can be programmed for a variety of thermocouples all to DIN EN 60584-3.The sensors thermoelectric emfs are converted temperature linearly into the output signal which ranges from 0 to 20 mA. This is where temperature compensation takes place within the measuring transducer which is configured via a micro USB port.

Approvals

EN61326-1:2006
EN61326-2-3:2006

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 31,352

Each (In a Pack of 20) (bez PDV-a)

RSD 37,622

Each (In a Pack of 20) (s PDV-om)

Nexperia PMD3001D,115, MOSFET 1, 40V 6-Pin, TSOP

RSD 31,352

Each (In a Pack of 20) (bez PDV-a)

RSD 37,622

Each (In a Pack of 20) (s PDV-om)

Nexperia PMD3001D,115, MOSFET 1, 40V 6-Pin, TSOP
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

China

Detalji o proizvodu

LKM 281 Digital Programmable Measuring Transducer

The LKM 281 series is a digital programmable galvanically isolated measuring transducer for thermocouples. The transducer is mounted on standard rails and is designed in three wire. The LKM 281 transducer was designed to be used in cars. The transducer has a high interference immunity plus a wide range of voltages even a supply voltage of 8V you can obtain a liner output signal of 20 mA. A slim 6mm design means this transducer takes little space on a standard rail and has optimum shock resistance.
An added benefit to all users is that this measuring transducer can be programmed for a variety of thermocouples all to DIN EN 60584-3.The sensors thermoelectric emfs are converted temperature linearly into the output signal which ranges from 0 to 20 mA. This is where temperature compensation takes place within the measuring transducer which is configured via a micro USB port.

Approvals

EN61326-1:2006
EN61326-2-3:2006