Tehnička dokumentacija
Tehnički podaci
Brand
Sensata / CrydomSeries
DRC
Normal State Configuration
3NO
Number Of Auxiliary Contacts
0
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Mounting Style
DIN Rail Mount
Control Voltage
208 V ac → 265 V ac
Maximum Operating Temperature
+80°C
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
6.1 mA → 8mA
Load Current
7.6A
Pole and Throw Configuration
3PST
Zemlja podrijetla
Mexico
Detalji o proizvodu
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 222,78
Each (bez PDV-a)
KM 260,65
Each (s PDV-om)
1
KM 222,78
Each (bez PDV-a)
KM 260,65
Each (s PDV-om)
1
Kupujte na veliko
količina | Jedinična cijena |
---|---|
1 - 4 | KM 222,78 |
5+ | KM 214,13 |
Tehnička dokumentacija
Tehnički podaci
Brand
Sensata / CrydomSeries
DRC
Normal State Configuration
3NO
Number Of Auxiliary Contacts
0
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Mounting Style
DIN Rail Mount
Control Voltage
208 V ac → 265 V ac
Maximum Operating Temperature
+80°C
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
6.1 mA → 8mA
Load Current
7.6A
Pole and Throw Configuration
3PST
Zemlja podrijetla
Mexico
Detalji o proizvodu
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.