Tehnička dokumentacija
Tehnički podaci
Electrical Connection
M12 Male Connector 5-Pin
Minimum Operating Temperature
-55°C
Dielectric Material Family
Mica
Terminal Type
Radial
Maximum Operating Temperature
+125°C
Capacitance
1nF
Tolerance
±5%
Lead Pitch
8.7mm
Depth
5.6mm
Voltage
500V dc
Length
16.5mm
Height
13.2mm
Brand
Cornell-DubilierSeries
CD15
Dimensions
16.5 x 5.6 x 13.2mm
Detalji o proizvodu
Evaluation Board for AD9102 14-Bit Digital-to-Analogue Converter and Waveform Generator
The AD9102 is a 14-Bit Digital to Analogue Converter and Waveform Generator. The AD9102-EBZ evaluation board includes a PIC 18F4550 processor programmed to function as a PC USB interface to the SPI port of the device. And an AD9514 clock chip that takes in an up to 1440MHz signal from the clock source and provides the CLKP/N input to the AD9102. The EVB runs from a single 5 Volt supply.
Digital to Analogue Converters - Analog Devices
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 12,869
komadno (u pakovanju od 2) (bez PDV-a)
KM 15,057
komadno (u pakovanju od 2) (s PDV-om)
2
KM 12,869
komadno (u pakovanju od 2) (bez PDV-a)
KM 15,057
komadno (u pakovanju od 2) (s PDV-om)
2
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
2 - 18 | KM 12,869 | KM 25,74 |
20 - 38 | KM 10,49 | KM 20,98 |
40+ | KM 10,382 | KM 20,76 |
Tehnička dokumentacija
Tehnički podaci
Electrical Connection
M12 Male Connector 5-Pin
Minimum Operating Temperature
-55°C
Dielectric Material Family
Mica
Terminal Type
Radial
Maximum Operating Temperature
+125°C
Capacitance
1nF
Tolerance
±5%
Lead Pitch
8.7mm
Depth
5.6mm
Voltage
500V dc
Length
16.5mm
Height
13.2mm
Brand
Cornell-DubilierSeries
CD15
Dimensions
16.5 x 5.6 x 13.2mm
Detalji o proizvodu
Evaluation Board for AD9102 14-Bit Digital-to-Analogue Converter and Waveform Generator
The AD9102 is a 14-Bit Digital to Analogue Converter and Waveform Generator. The AD9102-EBZ evaluation board includes a PIC 18F4550 processor programmed to function as a PC USB interface to the SPI port of the device. And an AD9514 clock chip that takes in an up to 1440MHz signal from the clock source and provides the CLKP/N input to the AD9102. The EVB runs from a single 5 Volt supply.