Tehnička dokumentacija
Tehnički podaci
Brand
MolexNumber Of Contacts
60
Gender
Male
Body Orientation
Straight
Termination Method
Solder
Housing Material
Steel
Series
70929
Series Number
70929
Zemlja podrijetla
Mexico
Detalji o proizvodu
Molex LFH Subassembly, 70929 Series
The 70929 Series LFH Matrix 50 is a 60 way contact system. Use with 70984 Series Terminal Sticks stock number 720-6220 typical.
Molex Low Force Helix (LFH) Range
The Molex Low Force Helix (LFH) contact system is designed for high-pin count, high speed signal requirements for both cable-to-board and board-to-board applications. The low insertion forces make the LFH system an ideal solution where multiple single lines need to be terminated or packaged into a limited space. The LFH Matrix 50 system contact layout is four rows on 1.27 by 1.27mm (.050 by .050") spacing and features I/O shielding and support both vertical and right angle board mounting. Termination is achieved by the wires being welded or soldered directly to the Terminals Sticks.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 10,706
Each (In a Pack of 5) (bez PDV-a)
KM 12,526
Each (In a Pack of 5) (s PDV-om)
5
KM 10,706
Each (In a Pack of 5) (bez PDV-a)
KM 12,526
Each (In a Pack of 5) (s PDV-om)
5
Tehnička dokumentacija
Tehnički podaci
Brand
MolexNumber Of Contacts
60
Gender
Male
Body Orientation
Straight
Termination Method
Solder
Housing Material
Steel
Series
70929
Series Number
70929
Zemlja podrijetla
Mexico
Detalji o proizvodu
Molex LFH Subassembly, 70929 Series
The 70929 Series LFH Matrix 50 is a 60 way contact system. Use with 70984 Series Terminal Sticks stock number 720-6220 typical.
Molex Low Force Helix (LFH) Range
The Molex Low Force Helix (LFH) contact system is designed for high-pin count, high speed signal requirements for both cable-to-board and board-to-board applications. The low insertion forces make the LFH system an ideal solution where multiple single lines need to be terminated or packaged into a limited space. The LFH Matrix 50 system contact layout is four rows on 1.27 by 1.27mm (.050 by .050") spacing and features I/O shielding and support both vertical and right angle board mounting. Termination is achieved by the wires being welded or soldered directly to the Terminals Sticks.