Parker Hydraulic Straight Threaded Adaptor G 1/4 to G 3/8 Male, 4-6F6MK4S
Tehnička dokumentacija
Tehnički podaci
Brand
ParkerConnector A
G 1/4
Hydraulic Fitting Type
Hydraulic Straight Threaded Adaptor
Connector B
G 3/8 Male
Material
Steel
Finish
Zinc Plated
Connector A - Thread Standard
G
Connector A - Gender
Female
Connector B - Gender
Male
Connector B - Thread Standard
G
Maximum Operating Pressure
350bar
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+120°C
Detalji o proizvodu
Swivel Nut Adaptor
Straight female to male BSP parallel thread adaptor.
Parkers K series adapters are manufactured to meet BS5200 standards and designed to seal with BSP
Hose swivel connectors. Parkers K4 adapter series can be used with Parker D9/92, B1, B2 and B4 adapters. Straight fittings can also be used an adaptor with ISO 1179-1 / DIN 3852 ports by using a bonded seal.
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 18,969
Each (In a Pack of 2) (bez PDV-a)
KM 22,194
Each (In a Pack of 2) (s PDV-om)
2
KM 18,969
Each (In a Pack of 2) (bez PDV-a)
KM 22,194
Each (In a Pack of 2) (s PDV-om)
2
Kupujte na veliko
| količina | Jedinična cijena | Po pakovanje |
|---|---|---|
| 2 - 8 | KM 18,969 | KM 37,94 |
| 10+ | KM 18,277 | KM 36,55 |
Tehnička dokumentacija
Tehnički podaci
Brand
ParkerConnector A
G 1/4
Hydraulic Fitting Type
Hydraulic Straight Threaded Adaptor
Connector B
G 3/8 Male
Material
Steel
Finish
Zinc Plated
Connector A - Thread Standard
G
Connector A - Gender
Female
Connector B - Gender
Male
Connector B - Thread Standard
G
Maximum Operating Pressure
350bar
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+120°C
Detalji o proizvodu
Swivel Nut Adaptor
Straight female to male BSP parallel thread adaptor.
Parkers K series adapters are manufactured to meet BS5200 standards and designed to seal with BSP
Hose swivel connectors. Parkers K4 adapter series can be used with Parker D9/92, B1, B2 and B4 adapters. Straight fittings can also be used an adaptor with ISO 1179-1 / DIN 3852 ports by using a bonded seal.
Warning
Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.