ESD Continuous Monitor 5V
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProTerminal Type
Banana
Supply Voltage
5V
Height
30mm
Number of Operators
1
Length
61mm
Number of Worksurfaces
1
Width
69mm
Supervisor Monitoring
Yes
Parking Station
No
Charge Detection
No
EOS Detection
Yes
Complies with EN 61340-5-1
Yes
Zemlja podrijetla
United States
Detalji o proizvodu
RS Pro Body Voltage Monitor
The RS Body Voltage Monitor is a single station continuous monitor for one operator, one ESD work surface and one tool ground. A second monitored jack is featured for use by a supervisor or second operator.
The Body Voltage Monitor uses Dual-Channel Voltage Monitoring Technology for true continuous monitoring (versus pulsed or intermittent). The Dual-Channel Voltage Monitoring Technology uses one lead of the dual-wire wrist strap (not included) to provide a path-to-ground for the operator while the other lead continuously monitors for voltage induced onto the operator greater than ±3 V dc. Voltage on the operator can be caused by strong AC fields in the work area or by other charge generators such as rolling a non-ESD safe chair.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProTerminal Type
Banana
Supply Voltage
5V
Height
30mm
Number of Operators
1
Length
61mm
Number of Worksurfaces
1
Width
69mm
Supervisor Monitoring
Yes
Parking Station
No
Charge Detection
No
EOS Detection
Yes
Complies with EN 61340-5-1
Yes
Zemlja podrijetla
United States
Detalji o proizvodu
RS Pro Body Voltage Monitor
The RS Body Voltage Monitor is a single station continuous monitor for one operator, one ESD work surface and one tool ground. A second monitored jack is featured for use by a supervisor or second operator.
The Body Voltage Monitor uses Dual-Channel Voltage Monitoring Technology for true continuous monitoring (versus pulsed or intermittent). The Dual-Channel Voltage Monitoring Technology uses one lead of the dual-wire wrist strap (not included) to provide a path-to-ground for the operator while the other lead continuously monitors for voltage induced onto the operator greater than ±3 V dc. Voltage on the operator can be caused by strong AC fields in the work area or by other charge generators such as rolling a non-ESD safe chair.