ADAFRUIT GEMMA V2 Wearable Development Board 1222

RS kataloški broj:: 124-5508brend: ADAFRUIT INDUSTRIESProizvođački broj:: 1222Distrelec broj artikla: 30091135
brand-logo

Tehnička dokumentacija

Tehnički podaci

Classification

Development Board

Kit Name

GEMMA V2

Technology

Wearable

Processor Part Number

ATtiny85

Processor Type

MCU

Zemlja podrijetla

United States

Detalji o proizvodu

Adafruit GEMMA Wearable Platform v2

GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.

This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.

The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.

Adafruit GEMMA Wearable Platform

RSD 1.366

RSD 1.366 Each (bez PDV-a)

RSD 1.640

RSD 1.640 Each (s PDV-om)

ADAFRUIT GEMMA V2 Wearable Development Board 1222

RSD 1.366

RSD 1.366 Each (bez PDV-a)

RSD 1.640

RSD 1.640 Each (s PDV-om)

ADAFRUIT GEMMA V2 Wearable Development Board 1222

Informacije o stanju skladišta trenutno nisu dostupne.

Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Classification

Development Board

Kit Name

GEMMA V2

Technology

Wearable

Processor Part Number

ATtiny85

Processor Type

MCU

Zemlja podrijetla

United States

Detalji o proizvodu

Adafruit GEMMA Wearable Platform v2

GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.

This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.

The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.

Adafruit GEMMA Wearable Platform