RS PRO E10 Indicator Light, Clear, 2.5 V, 250 mA, 30h
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProVoltage Rating
2.5 V
Lamp Base
E10
Current Rating
250 mA
Diameter
11mm
Lamp Size
G3 1/2
Length
24 mm
Lens Colour
Clear
Life Hours
30h
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
G-3 (11mm) Round MES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
€ 14,70
€ 1,47 Each (In a Pack of 10) (bez PDV-a)
€ 17,20
€ 1,72 Each (In a Pack of 10) (s PDV-om)
10
€ 14,70
€ 1,47 Each (In a Pack of 10) (bez PDV-a)
€ 17,20
€ 1,72 Each (In a Pack of 10) (s PDV-om)
10
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
| količina | Jedinična cijena | Po pakovanje |
|---|---|---|
| 10 - 240 | € 1,47 | € 14,70 |
| 250 - 990 | € 1,38 | € 13,80 |
| 1000+ | € 1,36 | € 13,60 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProVoltage Rating
2.5 V
Lamp Base
E10
Current Rating
250 mA
Diameter
11mm
Lamp Size
G3 1/2
Length
24 mm
Lens Colour
Clear
Life Hours
30h
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
G-3 (11mm) Round MES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.