RS PRO Test Pin 3A
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProCurrent Rating
3A
Probe Socket Diameter
24.7mm
Distrelec Product Id
30419209
Zemlja podrijetla
China
Detalji o proizvodu
RS Pro Spring Probe with Flat Head
Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The flat head provides positive contact without leaving marks or indentations.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)
€ 16,30
€ 3,26 Each (In a Pack of 5) (bez PDV-a)
€ 19,07
€ 3,814 Each (In a Pack of 5) (s PDV-om)
5
€ 16,30
€ 3,26 Each (In a Pack of 5) (bez PDV-a)
€ 19,07
€ 3,814 Each (In a Pack of 5) (s PDV-om)
5
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
| količina | Jedinična cijena | Po pakovanje |
|---|---|---|
| 5 - 20 | € 3,26 | € 16,30 |
| 25 - 45 | € 3,06 | € 15,30 |
| 50 - 95 | € 2,93 | € 14,65 |
| 100+ | € 2,78 | € 13,90 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProCurrent Rating
3A
Probe Socket Diameter
24.7mm
Distrelec Product Id
30419209
Zemlja podrijetla
China
Detalji o proizvodu
RS Pro Spring Probe with Flat Head
Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The flat head provides positive contact without leaving marks or indentations.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)