INA KH25-PP, Bearing with 35mm Outside Diameter
Tehnička dokumentacija
Tehnički podaci
Brand
INAInside Diameter
25mm
Outside Diameter
35mm
Length
40mm
Linear Bearing Type
Linear Ball Bearing
Inner Diameter
25mm
Linear Ball Bearing Type
Open
Seals
With Seals
Dynamic Load Rating
2420N
Static Load Rating
2130N
Zemlja podrijetla
Germany
Detalji o proizvodu
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.
INA
RSD 4.456
RSD 4.456 Each (bez PDV-a)
RSD 5.347
RSD 5.347 Each (s PDV-om)
1
RSD 4.456
RSD 4.456 Each (bez PDV-a)
RSD 5.347
RSD 5.347 Each (s PDV-om)
1
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
| količina | Jedinična cena |
|---|---|
| 1 - 4 | RSD 4.456 |
| 5+ | RSD 4.338 |
Tehnička dokumentacija
Tehnički podaci
Brand
INAInside Diameter
25mm
Outside Diameter
35mm
Length
40mm
Linear Bearing Type
Linear Ball Bearing
Inner Diameter
25mm
Linear Ball Bearing Type
Open
Seals
With Seals
Dynamic Load Rating
2420N
Static Load Rating
2130N
Zemlja podrijetla
Germany
Detalji o proizvodu
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.