Allen Bradley Guardmaster Sipha 440N Safety Relay, 24V ac, 2 Safety Contacts
Tehnička dokumentacija
Tehnički podaci
Supply Voltage
24 V ac/dc, 115/230V ac
Safety Contacts
2
Auxiliary Contacts
1
Range
Sipha
Series
440N
IP Rating
IP67
Depth
120mm
Width
45.5mm
Series
440N
Length
73mm
Depth
120mm
Width
45.5mm
Width
45.5mm
Length
73mm
Safety Category
ANSI B11.19, AS4024.1, CE, cULus, E N1088, EN 954-1, IEC 60947-5-1, IEC/EN 60204-1, ISO 13849-1, ISO 14119, NFPA 79, Sipha 1/2 Category 3 EN954-1, TUV
Zemlja podrijetla
Dominican Republic
Detalji o proizvodu
Allen-Bradley Sipha S2 Non-contact Safety Switch
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Supplied with
Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 1.073,43
Each (bez PDV-a)
KM 1.255,91
Each (s PDV-om)
1
KM 1.073,43
Each (bez PDV-a)
KM 1.255,91
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Supply Voltage
24 V ac/dc, 115/230V ac
Safety Contacts
2
Auxiliary Contacts
1
Range
Sipha
Series
440N
IP Rating
IP67
Depth
120mm
Width
45.5mm
Series
440N
Length
73mm
Depth
120mm
Width
45.5mm
Width
45.5mm
Length
73mm
Safety Category
ANSI B11.19, AS4024.1, CE, cULus, E N1088, EN 954-1, IEC 60947-5-1, IEC/EN 60204-1, ISO 13849-1, ISO 14119, NFPA 79, Sipha 1/2 Category 3 EN954-1, TUV
Zemlja podrijetla
Dominican Republic
Detalji o proizvodu
Allen-Bradley Sipha S2 Non-contact Safety Switch
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Supplied with
Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.