Bergquist Self-Adhesive Thermal Interface Sheet, 0.06in Thick, 5W/m·K, Gap Pad 5000S35, 4 x 4in

RS kataloški broj:: 707-3430robna marka: BergquistProizvođački broj:: GP5000S35-0.060-02-0404
brand-logo
Prikaži sve u Thermal Pads

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

United States

Detalji o proizvodu

Window Comparators, Texas Instruments

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 235,76

Each (bez PDV-a)

KM 275,84

Each (s PDV-om)

Bergquist Self-Adhesive Thermal Interface Sheet, 0.06in Thick, 5W/m·K, Gap Pad 5000S35, 4 x 4in

KM 235,76

Each (bez PDV-a)

KM 275,84

Each (s PDV-om)

Bergquist Self-Adhesive Thermal Interface Sheet, 0.06in Thick, 5W/m·K, Gap Pad 5000S35, 4 x 4in
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cijena
1 - 9KM 235,76
10 - 49KM 214,13
50+KM 198,99

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

United States

Detalji o proizvodu

Window Comparators, Texas Instruments

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.