EA Elektro-Automatik EL 9000 B HP Series Electronic DC Load, 0 → 1800 W, 0 → 360 V, 0 → 40 A
Tehnička dokumentacija
Tehnički podaci
Brand
EA Elektro-AutomatikSeries
EL 9000 B HP
Load Type
Programmable
Constant Voltage Mode Range
0 → 360 V
Constant Current Mode Range
0 → 40 A
Constant Resistance Mode Range
0.7 → 300 Ω
Constant Wattage Mode Range
0 → 1800 W
Rack Units
2 U
Zemlja podrijetla
Germany
Detalji o proizvodu
EL 9000 B HP Series
The electronic DC loads series EA-EL 9000 B HP replace the current EA-EL 9000 HP series. They reduce the required unit height from 3U to 2U. Meaning, the steady power of 7200 W of a former EA-EL 9000 HP device can already be achieved in 6U of height where it required 9U before. The result is a space saving of 33% which allows for achieving even more power in a 19" cabinet.
All models support the four common regulation modes constant voltage (CV), constant current (CC), constant power (CP) and constant resistance (CR). The FPGA-based control circuit provides interesting features, such as a function generator with a table-based function for the simulation of nonlinear internal resistances.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Brand
EA Elektro-AutomatikSeries
EL 9000 B HP
Load Type
Programmable
Constant Voltage Mode Range
0 → 360 V
Constant Current Mode Range
0 → 40 A
Constant Resistance Mode Range
0.7 → 300 Ω
Constant Wattage Mode Range
0 → 1800 W
Rack Units
2 U
Zemlja podrijetla
Germany
Detalji o proizvodu
EL 9000 B HP Series
The electronic DC loads series EA-EL 9000 B HP replace the current EA-EL 9000 HP series. They reduce the required unit height from 3U to 2U. Meaning, the steady power of 7200 W of a former EA-EL 9000 HP device can already be achieved in 6U of height where it required 9U before. The result is a space saving of 33% which allows for achieving even more power in a 19" cabinet.
All models support the four common regulation modes constant voltage (CV), constant current (CC), constant power (CP) and constant resistance (CR). The FPGA-based control circuit provides interesting features, such as a function generator with a table-based function for the simulation of nonlinear internal resistances.