KEMET Ferrite Flat Cable Ferrite, Solid Core, Inner dims. 23.5 x 1.5mm
Tehnička dokumentacija
Tehnički podaci
Brand
KEMETType
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Detalji o proizvodu
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 163,294
komad (u vrečici od 5) (bez PDV-a)
RSD 195,953
komad (u vrečici od 5) (s PDV-om)
Standard
5
RSD 163,294
komad (u vrečici od 5) (bez PDV-a)
RSD 195,953
komad (u vrečici od 5) (s PDV-om)
Standard
5
Kupujte na veliko
| količina | Jedinična cena | Po kesa |
|---|---|---|
| 5 - 45 | RSD 163,294 | RSD 816 |
| 50 - 95 | RSD 155,456 | RSD 777 |
| 100 - 245 | RSD 154,149 | RSD 771 |
| 250 - 495 | RSD 146,311 | RSD 732 |
| 500+ | RSD 137,167 | RSD 686 |
Tehnička dokumentacija
Tehnički podaci
Brand
KEMETType
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Detalji o proizvodu
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.