Tehnička dokumentacija
Tehnički podaci
Brand
PR ElectronicsModule Type
Signal Calculator
Input Signal Type
Current, RTD, Thermocouple, Voltage
Output Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Operating Temperature Range
-20 → +60°C
Series
5115A
Maximum Operating Temperature
+60°C
Minimum Operating Temperature
-20°C
Zemlja podrijetla
Denmark
Detalji o proizvodu
PR Electronics 5115A Signal Calculator
PR Electronics 5115A programmable transmitter for redundancy measurement of temperature by means of two sensors, where the secondary sensor takes over the measurement when a sensor error occurs on the primary sensor. With a wide variety of jumper selectable inputs for current/voltage or temperature and conversion of linear resistance the 5114 transmitters are suitable for a wide range of temperature measurement applications.
The 5115A transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5115A signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.
PR Electronics DIN Rail Mounting
Cena na upit
1
Cena na upit
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
Tehnička dokumentacija
Tehnički podaci
Brand
PR ElectronicsModule Type
Signal Calculator
Input Signal Type
Current, RTD, Thermocouple, Voltage
Output Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Operating Temperature Range
-20 → +60°C
Series
5115A
Maximum Operating Temperature
+60°C
Minimum Operating Temperature
-20°C
Zemlja podrijetla
Denmark
Detalji o proizvodu
PR Electronics 5115A Signal Calculator
PR Electronics 5115A programmable transmitter for redundancy measurement of temperature by means of two sensors, where the secondary sensor takes over the measurement when a sensor error occurs on the primary sensor. With a wide variety of jumper selectable inputs for current/voltage or temperature and conversion of linear resistance the 5114 transmitters are suitable for a wide range of temperature measurement applications.
The 5115A transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit (RS stock number 796-7020).
The 5115A signal conditioner is based on a microprocessor core with an efficient program operation. The basic calibration data and present set-up are stored in an EEPROM thereby avoiding the loss or change of data at power off.