RS PRO Insulated Crimp Bootlace Ferrule, 12mm Pin Length, 1.4mm Pin Diameter, 1mm² Wire Size, Red
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProMaximum Wire Size mm²
1mm²
Maximum Wire Size (mm²)
1mm²
Pin Diameter
1.4 mm, 1.7mm
Number of Entries
1
Insulation Material
Nylon
Colour
Red
Pin Length
12mm
Insulation
Insulated
Maximum Wire Size AWG
18AWG
Maximum Wire Size (AWG)
18AWG
Overall Length
18.5mm
Minimum Wire Size mm²
1mm²
Minimum Wire Size (mm²)
1mm²
Minimum Wire Size AWG
18AWG
Minimum Wire Size (AWG)
18AWG
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS PRO Insulated French Colour Coded Bootlace Ferrules
From RS PRO a range of high-quality French colour coded bootlace ferrules (also known as cord end terminals) for providing a clean end termination to multi-stranded wires. These reliable wire ferrules ensure that you have a positive connection when connecting wires to terminal blocks and captive terminals.
What Is a Bootlace Ferrule?
A bootlace ferrule is a metal tube or ferrule with a moulded colour coded insulating collar made from nylon. The ferrule is slipped over the end of a multi-stranded wire, crimped and then inserted into a screw or spring clamp connection.
Where is a Bootlace Ferrule Used?
When the end of a multi-stranded wire is stripped and placed directly under a screw terminal the strands of the wire will naturally fan out under the pressure of the screw. Some strands will go astray. This reduces the quality of the electrical connection and can also result in electrical shorts. When a bootlace ferrule is used, the insulated funnel with it's flared design captures all the strands. These strands are then crimped together in the ferrule tube. The crimped ferrule is then inserted into the terminal to create an electrical connection
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 0,476
Each (In a Pack of 100) (bez PDV-a)
KM 0,557
Each (In a Pack of 100) (s PDV-om)
100
KM 0,476
Each (In a Pack of 100) (bez PDV-a)
KM 0,557
Each (In a Pack of 100) (s PDV-om)
100
Kupujte na veliko
| količina | Jedinična cijena | Po pakovanje |
|---|---|---|
| 100 - 400 | KM 0,476 | KM 47,58 |
| 500 - 2400 | KM 0,411 | KM 41,10 |
| 2500 - 4900 | KM 0,389 | KM 38,93 |
| 5000+ | KM 0,346 | KM 34,61 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProMaximum Wire Size mm²
1mm²
Maximum Wire Size (mm²)
1mm²
Pin Diameter
1.4 mm, 1.7mm
Number of Entries
1
Insulation Material
Nylon
Colour
Red
Pin Length
12mm
Insulation
Insulated
Maximum Wire Size AWG
18AWG
Maximum Wire Size (AWG)
18AWG
Overall Length
18.5mm
Minimum Wire Size mm²
1mm²
Minimum Wire Size (mm²)
1mm²
Minimum Wire Size AWG
18AWG
Minimum Wire Size (AWG)
18AWG
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS PRO Insulated French Colour Coded Bootlace Ferrules
From RS PRO a range of high-quality French colour coded bootlace ferrules (also known as cord end terminals) for providing a clean end termination to multi-stranded wires. These reliable wire ferrules ensure that you have a positive connection when connecting wires to terminal blocks and captive terminals.
What Is a Bootlace Ferrule?
A bootlace ferrule is a metal tube or ferrule with a moulded colour coded insulating collar made from nylon. The ferrule is slipped over the end of a multi-stranded wire, crimped and then inserted into a screw or spring clamp connection.
Where is a Bootlace Ferrule Used?
When the end of a multi-stranded wire is stripped and placed directly under a screw terminal the strands of the wire will naturally fan out under the pressure of the screw. Some strands will go astray. This reduces the quality of the electrical connection and can also result in electrical shorts. When a bootlace ferrule is used, the insulated funnel with it's flared design captures all the strands. These strands are then crimped together in the ferrule tube. The crimped ferrule is then inserted into the terminal to create an electrical connection