Tehnička dokumentacija
Tehnički podaci
Brand
WinslowNumber Of Contacts
40
Mounting Type
Through Hole
Pin Type
Turned
Pitch
2.54mm
Row Width
15.24mm
Frame Type
Open Frame
Termination Method
Solder
Contact Plating
Gold, Tin
Current Rating
5A
Orientation
Vertical
Length
50.72mm
Width
4.6mm
Depth
17.66mm
Dimensions
50.72 x 4.6 x 17.66mm
Housing Material
PBT
Contact Material
Beryllium Copper
Minimum Operating Temperature
-65°C
Maximum Operating Temperature
+150°C
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Turned Pin, DIP Sockets
Winslow brings you a series of high quality machined DIP sockets. They are an open frame type of socket and are made from a PBT housing for reliability. The contacts are gold over nickel-plated (0.3μm) with beryllium-copper inner contact with a tin-plated brass outer shell. They are rated up to 1000 insertions.
These IC DIP sockets are brilliant use for non-permanent development work, they will allow you to debug your system before any permanent soldering takes place.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 4,65
Each (In a Pack of 5) (bez PDV-a)
KM 5,441
Each (In a Pack of 5) (s PDV-om)
5
KM 4,65
Each (In a Pack of 5) (bez PDV-a)
KM 5,441
Each (In a Pack of 5) (s PDV-om)
5
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
5 - 120 | KM 4,65 | KM 23,25 |
125 - 370 | KM 4,239 | KM 21,20 |
375 - 995 | KM 3,936 | KM 19,68 |
1000 - 1995 | KM 3,59 | KM 17,95 |
2000+ | KM 3,439 | KM 17,20 |
Tehnička dokumentacija
Tehnički podaci
Brand
WinslowNumber Of Contacts
40
Mounting Type
Through Hole
Pin Type
Turned
Pitch
2.54mm
Row Width
15.24mm
Frame Type
Open Frame
Termination Method
Solder
Contact Plating
Gold, Tin
Current Rating
5A
Orientation
Vertical
Length
50.72mm
Width
4.6mm
Depth
17.66mm
Dimensions
50.72 x 4.6 x 17.66mm
Housing Material
PBT
Contact Material
Beryllium Copper
Minimum Operating Temperature
-65°C
Maximum Operating Temperature
+150°C
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Turned Pin, DIP Sockets
Winslow brings you a series of high quality machined DIP sockets. They are an open frame type of socket and are made from a PBT housing for reliability. The contacts are gold over nickel-plated (0.3μm) with beryllium-copper inner contact with a tin-plated brass outer shell. They are rated up to 1000 insertions.
These IC DIP sockets are brilliant use for non-permanent development work, they will allow you to debug your system before any permanent soldering takes place.