3M Polishing Film

RS kataloški broj:: 267-8144robna marka: 3MProizvođački broj:: 254X ILF AO 2MIL TR3
brand-logo
Prikaži sve u Polishing & Finishing Accessories

Tehnička dokumentacija

Tehnički podaci

Brand

3M

Series

254X

Zemlja podrijetla

United States

Detalji o proizvodu

3M ST, SC and LC Hot Melt Fibre Optic Connectors

Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.

Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.

The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 4,283

Each (In a Bag of 50) (bez PDV-a)

KM 5,011

Each (In a Bag of 50) (s PDV-om)

3M Polishing Film

50

Dostupno u više komada 50
50KM 214,13
100KM 428,25
150KM 642,38
200KM 856,51
250KM 1.070,64
300KM 1.284,76
350KM 1.498,89
400KM 1.713,02
450KM 1.927,14
500KM 2.141,27
550KM 2.355,40
600KM 2.569,53
650KM 2.783,65
700KM 2.997,78
750KM 3.211,91

KM 4,283

Each (In a Bag of 50) (bez PDV-a)

KM 5,011

Each (In a Bag of 50) (s PDV-om)

3M Polishing Film
Informacije o stanju skladišta trenutno nisu dostupne.

50

Dostupno u više komada 50
50KM 214,13
100KM 428,25
150KM 642,38
200KM 856,51
250KM 1.070,64
300KM 1.284,76
350KM 1.498,89
400KM 1.713,02
450KM 1.927,14
500KM 2.141,27
550KM 2.355,40
600KM 2.569,53
650KM 2.783,65
700KM 2.997,78
750KM 3.211,91

Tehnička dokumentacija

Tehnički podaci

Brand

3M

Series

254X

Zemlja podrijetla

United States

Detalji o proizvodu

3M ST, SC and LC Hot Melt Fibre Optic Connectors

Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.

Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.

The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.