Analog Devices LT1961EMS8E#PBF, 1-Channel, Step Up DC-DC Converter, Adjustable, 1.5A 8-Pin, MSOP

RS kataloški broj:: 761-8532robna marka: Analog DevicesProizvođački broj:: LT1961EMS8E#PBF
brand-logo
Prikaži sve u DC-DC Converters ICs

Tehnička dokumentacija

Tehnički podaci

Minimum Output Voltage

1.2 V

Maximum Output Voltage

35 V

Minimum Input Voltage

3 V

Maximum Input Voltage

25 V

Minimum Output Current

1.5A

Maximum Output Current

3A

Converter Type

Step Up

Number of Outputs

1

Output Type

Adjustable

Mounting Type

Surface Mount

Maximum Switching Frequency

1.5 MHz

Package Type

MSOP

Pin Count

8

Maximum Operating Temperature

+125 °C

Minimum Operating Temperature

-40 °C

Switching Regulator

Yes

Length

3mm

Height

0.86mm

Width

3mm

Dimensions

3 x 3 x 0.86mm

Detalji o proizvodu

SEPIC Regulators, Linear Technology

A range of SEPIC DC-DC Converters from Linear Technology which can be used in applications where the output voltage may be either higher or lower than the input voltage. The SEPIC (Single-Ended Primary-Inductor Converter) topology also allows these converters to produce a negative output from a positive input voltage. Some of these switching regulators include features such as multiple outputs, programmable current limit, low battery detection and burst-mode operation.

Switching Voltage Regulators, Linear Technology

Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 18,23

KM 18,23 Each (bez PDV-a)

KM 21,33

KM 21,33 Each (s PDV-om)

Analog Devices LT1961EMS8E#PBF, 1-Channel, Step Up DC-DC Converter, Adjustable, 1.5A 8-Pin, MSOP
Odaberite vrstu pakovanja

KM 18,23

KM 18,23 Each (bez PDV-a)

KM 21,33

KM 21,33 Each (s PDV-om)

Analog Devices LT1961EMS8E#PBF, 1-Channel, Step Up DC-DC Converter, Adjustable, 1.5A 8-Pin, MSOP
Informacije o stanju skladišta trenutno nisu dostupne.
Odaberite vrstu pakovanja

Kupujte na veliko

količinaJedinična cijena
1 - 9KM 18,23
10 - 24KM 15,70
25+KM 13,37

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Minimum Output Voltage

1.2 V

Maximum Output Voltage

35 V

Minimum Input Voltage

3 V

Maximum Input Voltage

25 V

Minimum Output Current

1.5A

Maximum Output Current

3A

Converter Type

Step Up

Number of Outputs

1

Output Type

Adjustable

Mounting Type

Surface Mount

Maximum Switching Frequency

1.5 MHz

Package Type

MSOP

Pin Count

8

Maximum Operating Temperature

+125 °C

Minimum Operating Temperature

-40 °C

Switching Regulator

Yes

Length

3mm

Height

0.86mm

Width

3mm

Dimensions

3 x 3 x 0.86mm

Detalji o proizvodu

SEPIC Regulators, Linear Technology

A range of SEPIC DC-DC Converters from Linear Technology which can be used in applications where the output voltage may be either higher or lower than the input voltage. The SEPIC (Single-Ended Primary-Inductor Converter) topology also allows these converters to produce a negative output from a positive input voltage. Some of these switching regulators include features such as multiple outputs, programmable current limit, low battery detection and burst-mode operation.

Switching Voltage Regulators, Linear Technology

Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više