Toggle Switch Boot Toggle Switch Boot for use with Toggle Switch

RS kataloški broj:: 190-0709robna marka: APEMProizvođački broj:: U851
brand-logo
Prikaži sve u Toggle Switch Caps & Boots

Tehnička dokumentacija

Tehnički podaci

Brand

Apem

Accessory Type

Toggle Switch Boot

For Use With

Toggle Switch

Colour

Black

Zemlja podrijetla

France

Detalji o proizvodu

APEM Toggle Switch Sealing Boots

One of the main reasons switches fail is because they have not been sealed correctly when initially installed. Using sealing boots or hoods provides extra protection and can prolong the life of the components they are used with. Sealing boots prevent the ingress of dust, sand, and moisture from penetrating the switch and causing potential damage or failure.

APEM’s range of sealing boots/hoods are simple and for easy to use. Robustly designed the one-piece construction is made from a moulded toggle cover bonded to a built-in mounting nut. Easy to fit, APEM’s toggle switch boots are used in place of the original mounting nut. This encloses the base of the switch bushing forming a tight seal against the front of the panel face.

The APEM full-toggle (standard) range of sealing boots are made from a choice of tough materials. Either high-temperature Silicone or mechanically resistant Neoprene. Both types of sealing hoods have nickel-plated brass fixing hex nuts with a plain or knurled edge.

Miniature Lockable Toggle Switches

Approvals

UL E187490

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 11,57

Each (bez PDV-a)

KM 13,54

Each (s PDV-om)

Toggle Switch Boot Toggle Switch Boot for use with Toggle Switch

1

Dostupno u više komada 1
1KM 11,57
2KM 23,14
3KM 34,71
4KM 46,29
5KM 57,86
6KM 69,43
7KM 81,00
8KM 92,57
9KM 104,14
10KM 115,72
11KM 127,29
12KM 138,86
13KM 150,43
14KM 162,00
15KM 173,57

KM 11,57

Each (bez PDV-a)

KM 13,54

Each (s PDV-om)

Toggle Switch Boot Toggle Switch Boot for use with Toggle Switch
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1KM 11,57
2KM 23,14
3KM 34,71
4KM 46,29
5KM 57,86
6KM 69,43
7KM 81,00
8KM 92,57
9KM 104,14
10KM 115,72
11KM 127,29
12KM 138,86
13KM 150,43
14KM 162,00
15KM 173,57

Kupujte na veliko

količinaJedinična cijena
1 - 24KM 11,57
25 - 49KM 9,52
50 - 99KM 9,08
100 - 249KM 8,76
250+KM 8,33

Tehnička dokumentacija

Tehnički podaci

Brand

Apem

Accessory Type

Toggle Switch Boot

For Use With

Toggle Switch

Colour

Black

Zemlja podrijetla

France

Detalji o proizvodu

APEM Toggle Switch Sealing Boots

One of the main reasons switches fail is because they have not been sealed correctly when initially installed. Using sealing boots or hoods provides extra protection and can prolong the life of the components they are used with. Sealing boots prevent the ingress of dust, sand, and moisture from penetrating the switch and causing potential damage or failure.

APEM’s range of sealing boots/hoods are simple and for easy to use. Robustly designed the one-piece construction is made from a moulded toggle cover bonded to a built-in mounting nut. Easy to fit, APEM’s toggle switch boots are used in place of the original mounting nut. This encloses the base of the switch bushing forming a tight seal against the front of the panel face.

The APEM full-toggle (standard) range of sealing boots are made from a choice of tough materials. Either high-temperature Silicone or mechanically resistant Neoprene. Both types of sealing hoods have nickel-plated brass fixing hex nuts with a plain or knurled edge.

Miniature Lockable Toggle Switches

Approvals

UL E187490