Assemtech SPST Reed Switch, 500mA

RS kataloški broj:: 909-2705robna marka: AssemtechProizvođački broj:: GC2522 (10-20AT)
brand-logo
Prikaži sve u Reed Switches

Tehnička dokumentacija

Tehnički podaci

Contact Configuration

SPST

Maximum Switching Current

500mA

Contact Resistance

150mΩ

Contact Material

Rhodium

Maximum Release Time

0.05ms

Operating Time Including Bounce

0.3ms

AT Value Range

10-20AT

Width

2.1 (Dia.)mm

Length

11mm

Dimensions

2.1 (Dia.) x 11mm

Detalji o proizvodu

Form A & C Reed Switches

These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.

There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.

Approvals

UL, CSA

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 6,164

Each (In a Bag of 10) (bez PDV-a)

KM 7,212

Each (In a Bag of 10) (s PDV-om)

Assemtech SPST Reed Switch, 500mA

KM 6,164

Each (In a Bag of 10) (bez PDV-a)

KM 7,212

Each (In a Bag of 10) (s PDV-om)

Assemtech SPST Reed Switch, 500mA
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cijenaPo kesa
10 - 40KM 6,164KM 61,64
50+KM 5,732KM 57,32

Tehnička dokumentacija

Tehnički podaci

Contact Configuration

SPST

Maximum Switching Current

500mA

Contact Resistance

150mΩ

Contact Material

Rhodium

Maximum Release Time

0.05ms

Operating Time Including Bounce

0.3ms

AT Value Range

10-20AT

Width

2.1 (Dia.)mm

Length

11mm

Dimensions

2.1 (Dia.) x 11mm

Detalji o proizvodu

Form A & C Reed Switches

These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.

There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.

Approvals

UL, CSA