5MΩ, Through Hole Trimmer Potentiometer 0.5W Top Adjust Bourns, 3386

RS kataloški broj:: 785-9679Probna marka: BournsProizvođački broj:: 3386F-1-505LF
brand-logo
Prikaži sve u Trimmer Potentiometers

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

Costa Rica

Detalji o proizvodu

MIT480 Series Telecom Insulation & continuity test

Telecommunication insulation and continuity testers developed to meet the special requirements of telephone line testing, as well as the requirements of electrical contractors and industrial testing to CATIV 600V. All instruments meet TNV3 as well as IEC1010, HD384 and BSEN61557. The insulation test inhibit voltage has been raised to 75V to overcome interference between cables experienced at lower voltages, compared to 50V for standard cable testing.

Supplied with

Hard carry case, rubber boot with stand, silicone test lead set, SP5 remote switch probe, 5 off AA alkaline batteries & instructions (CD-ROM).

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 4,33

Each (Supplied in a Tube) (bez PDV-a)

KM 5,07

Each (Supplied in a Tube) (s PDV-om)

5MΩ, Through Hole Trimmer Potentiometer 0.5W Top Adjust Bourns, 3386

1

Dostupno u više komada 1
1KM 4,33
2KM 8,65
3KM 12,98
4KM 17,30
5KM 21,63
6KM 25,95
7KM 30,28
8KM 34,61
9KM 38,93
10KM 43,26
11KM 47,58
12KM 51,91
13KM 56,24
14KM 60,56
15KM 64,89

KM 4,33

Each (Supplied in a Tube) (bez PDV-a)

KM 5,07

Each (Supplied in a Tube) (s PDV-om)

5MΩ, Through Hole Trimmer Potentiometer 0.5W Top Adjust Bourns, 3386
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1KM 4,33
2KM 8,65
3KM 12,98
4KM 17,30
5KM 21,63
6KM 25,95
7KM 30,28
8KM 34,61
9KM 38,93
10KM 43,26
11KM 47,58
12KM 51,91
13KM 56,24
14KM 60,56
15KM 64,89

Tehnička dokumentacija

Tehnički podaci

Zemlja podrijetla

Costa Rica

Detalji o proizvodu

MIT480 Series Telecom Insulation & continuity test

Telecommunication insulation and continuity testers developed to meet the special requirements of telephone line testing, as well as the requirements of electrical contractors and industrial testing to CATIV 600V. All instruments meet TNV3 as well as IEC1010, HD384 and BSEN61557. The insulation test inhibit voltage has been raised to 75V to overcome interference between cables experienced at lower voltages, compared to 50V for standard cable testing.

Supplied with

Hard carry case, rubber boot with stand, silicone test lead set, SP5 remote switch probe, 5 off AA alkaline batteries & instructions (CD-ROM).