Tehnička dokumentacija
Tehnički podaci
Brand
CrouzetMonitoring Application
Voltage
Electrical Phase
3
Voltage Sensing Range
194 → 528V ac
Contact Configuration
DPDT
Voltage Sensitivity
Overvoltage, Undervoltage
Mounting Type
DIN Rail
Time Delay
0.3 → 30s
Series
H3US
Height
92.6mm
Length
69mm
Maximum Voltage Sensed
528V ac
Minimum Voltage Sensed
194V ac
Operating Temperature Range
+50°C
Minimum Operating Temperature
-20°C
Width
35mm
Maximum Operating Temperature
+50°C
Dimensions
69 x 35 x 92.6mm
Detalji o proizvodu
3-phase Voltage Control Relay - C-Lynx
3 phase voltage controllers which monitor:- Undervoltage, adjustable from -2% to -20% of Under voltage,- Overvoltage, adjustable from 2% to 20% of Under Voltage,- Presence of the neutral (H3USN only), Measurements are taken between Phases for the H3US - M3US and between Phases and Neutral for the H3USN, Faults are signalled via LED's, distinguishing the origin of the fault (one LED for the upper and lower threshold).
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 588,31
Each (bez PDV-a)
KM 688,32
Each (s PDV-om)
1
KM 588,31
Each (bez PDV-a)
KM 688,32
Each (s PDV-om)
1
Kupujte na veliko
količina | Jedinična cijena |
---|---|
1 - 4 | KM 588,31 |
5 - 9 | KM 568,84 |
10+ | KM 560,19 |
Tehnička dokumentacija
Tehnički podaci
Brand
CrouzetMonitoring Application
Voltage
Electrical Phase
3
Voltage Sensing Range
194 → 528V ac
Contact Configuration
DPDT
Voltage Sensitivity
Overvoltage, Undervoltage
Mounting Type
DIN Rail
Time Delay
0.3 → 30s
Series
H3US
Height
92.6mm
Length
69mm
Maximum Voltage Sensed
528V ac
Minimum Voltage Sensed
194V ac
Operating Temperature Range
+50°C
Minimum Operating Temperature
-20°C
Width
35mm
Maximum Operating Temperature
+50°C
Dimensions
69 x 35 x 92.6mm
Detalji o proizvodu
3-phase Voltage Control Relay - C-Lynx
3 phase voltage controllers which monitor:- Undervoltage, adjustable from -2% to -20% of Under voltage,- Overvoltage, adjustable from 2% to 20% of Under Voltage,- Presence of the neutral (H3USN only), Measurements are taken between Phases for the H3US - M3US and between Phases and Neutral for the H3USN, Faults are signalled via LED's, distinguishing the origin of the fault (one LED for the upper and lower threshold).