Dymo Heat Shrink Tubing, White 6mm Sleeve Dia. x 1.5m Length 3:1 Ratio, DYMO Series
Tehnička dokumentacija
Tehnički podaci
Brand
DymoSleeve Diameter
6mm
Colour
White
Shrunk Diameter
1.2mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
1.5m
Material
Polyolefin
Operating Temperature Range
Maximum of +125 °C
Flame Retardant
Yes
Better World Product (Saznajte više ...)
Yes
Series
DYMO
Better World Claim
Recycled materials
Zemlja podrijetla
Belgium
Detalji o proizvodu
Heat Shrink Tubing
DYMO’s heat shrink polyolefin tubes have been designed to offer a permanent solution to both cable identification and protection. The tubes can be directly printed on with any DYMO industrial labelling tool and remain legible even when exposed to solvents, fuels and oils. The printed sleeves are then applied before connection and are permanently secured after connection when shrunk with a heat gun.
Standards
MIL-DTL-23053/5 classes 1 and 3
KM 145,04
KM 145,04 Each (bez PDV-a)
KM 169,70
KM 169,70 Each (s PDV-om)
1
KM 145,04
KM 145,04 Each (bez PDV-a)
KM 169,70
KM 169,70 Each (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | Jedinična cijena |
|---|---|
| 1 - 9 | KM 145,04 |
| 10 - 29 | KM 139,78 |
| 30+ | KM 138,00 |
Tehnička dokumentacija
Tehnički podaci
Brand
DymoSleeve Diameter
6mm
Colour
White
Shrunk Diameter
1.2mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
1.5m
Material
Polyolefin
Operating Temperature Range
Maximum of +125 °C
Flame Retardant
Yes
Better World Product (Saznajte više ...)
Yes
Series
DYMO
Better World Claim
Recycled materials
Zemlja podrijetla
Belgium
Detalji o proizvodu
Heat Shrink Tubing
DYMO’s heat shrink polyolefin tubes have been designed to offer a permanent solution to both cable identification and protection. The tubes can be directly printed on with any DYMO industrial labelling tool and remain legible even when exposed to solvents, fuels and oils. The printed sleeves are then applied before connection and are permanently secured after connection when shrunk with a heat gun.
Standards
MIL-DTL-23053/5 classes 1 and 3