Festo Pneumatic Guided Cylinder - 170837, 16mm Bore, 50mm Stroke, DFM Series, Double Acting

RS kataloški broj:: 121-5391robna marka: FestoProizvođački broj:: DFM-16-50-P-A-GF
brand-logo
Prikaži sve u Pneumatic Guided Cylinders

Tehnička dokumentacija

Tehnički podaci

Brand

Festo

Stroke

50mm

Bore

16mm

Manufacturer Series

DFM

Action

Double

Maximum Operating Pressure

10 bar

Cushioning Type

Elastic

Model Number p

170837

Model Number (p)

170837

Dimensions

117 x 67 x 32mm

Weight

772g

Maximum Operating Temperature

+80°C

Length

117mm

Width

67mm

Absolute Maximum Pressure

1 Mpa

Height

32mm

Minimum Operating Temperature

-20°C

Zemlja podrijetla

Germany

Detalji o proizvodu

DFM Pneumatic Guided Cylinders - Slide Bearing

Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.

The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 885,71

Each (bez PDV-a)

KM 1.036,28

Each (s PDV-om)

Festo Pneumatic Guided Cylinder - 170837, 16mm Bore, 50mm Stroke, DFM Series, Double Acting

1

Dostupno u više komada 1
1KM 885,71
2KM 1.771,42
3KM 2.657,12
4KM 3.542,83
5KM 4.428,54
6KM 5.314,25
7KM 6.199,95
8KM 7.085,66
9KM 7.971,37
10KM 8.857,08
11KM 9.742,78
12KM 10.628,49
13KM 11.514,20
14KM 12.399,91
15KM 13.285,61

KM 885,71

Each (bez PDV-a)

KM 1.036,28

Each (s PDV-om)

Festo Pneumatic Guided Cylinder - 170837, 16mm Bore, 50mm Stroke, DFM Series, Double Acting
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1KM 885,71
2KM 1.771,42
3KM 2.657,12
4KM 3.542,83
5KM 4.428,54
6KM 5.314,25
7KM 6.199,95
8KM 7.085,66
9KM 7.971,37
10KM 8.857,08
11KM 9.742,78
12KM 10.628,49
13KM 11.514,20
14KM 12.399,91
15KM 13.285,61

Tehnička dokumentacija

Tehnički podaci

Brand

Festo

Stroke

50mm

Bore

16mm

Manufacturer Series

DFM

Action

Double

Maximum Operating Pressure

10 bar

Cushioning Type

Elastic

Model Number p

170837

Model Number (p)

170837

Dimensions

117 x 67 x 32mm

Weight

772g

Maximum Operating Temperature

+80°C

Length

117mm

Width

67mm

Absolute Maximum Pressure

1 Mpa

Height

32mm

Minimum Operating Temperature

-20°C

Zemlja podrijetla

Germany

Detalji o proizvodu

DFM Pneumatic Guided Cylinders - Slide Bearing

Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.

The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.