FTDI Chip VNC2 DEBUG MODULE, Chip Programming Adapter for Viniculum-II IDE

RS kataloški broj:: 708-0101robna marka: FTDI ChipProizvođački broj:: VNC2 DEBUG MODULE
brand-logo
Prikaži sve u Chip Programming Adapters

Tehnička dokumentacija

Tehnički podaci

Brand

FTDI Chip

For Use With

Viniculum-II IDE

Zemlja podrijetla

China

Detalji o proizvodu

Vinculum VNC2 Debug Module

The VNC2 debug module is designed to provide connectivity between the Vinculum-II IDE development software and the debug interface pin on the FTDI Vinculum-II (VNC2) USB host controller device. The VNC2 debug module consists of a miniature board with a USB miniB connector, which provides USB connectivity to Vinculum-II IDE development tools running on a PC. The VNC2 debug module can be used to program and debug firmware running on the VNC2 device. The module connects to the VNC2 device via a 6-way, 2mm pitch, keyed, female connector. The V2DIPx-x, VNC2 based development modules are equipped with a compatible male connector to host the VNC2 debug module. Designers intending to use the module with their own VNC2 based hardware are required to have a similar compatible male connector on their hardware. Details on the debug interface and connectors are outlined in subsequent sections of this document.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 67,18

Each (bez PDV-a)

KM 78,60

Each (s PDV-om)

FTDI Chip VNC2 DEBUG MODULE, Chip Programming Adapter for Viniculum-II IDE

1

Dostupno u više komada 1
1KM 67,18
2KM 134,36
3KM 201,54
4KM 268,72
5KM 335,90
6KM 403,08
7KM 470,26
8KM 537,44
9KM 604,62
10KM 671,80
11KM 738,98
12KM 806,16
13KM 873,34
14KM 940,52
15KM 1.007,70

KM 67,18

Each (bez PDV-a)

KM 78,60

Each (s PDV-om)

FTDI Chip VNC2 DEBUG MODULE, Chip Programming Adapter for Viniculum-II IDE
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1KM 67,18
2KM 134,36
3KM 201,54
4KM 268,72
5KM 335,90
6KM 403,08
7KM 470,26
8KM 537,44
9KM 604,62
10KM 671,80
11KM 738,98
12KM 806,16
13KM 873,34
14KM 940,52
15KM 1.007,70

Tehnička dokumentacija

Tehnički podaci

Brand

FTDI Chip

For Use With

Viniculum-II IDE

Zemlja podrijetla

China

Detalji o proizvodu

Vinculum VNC2 Debug Module

The VNC2 debug module is designed to provide connectivity between the Vinculum-II IDE development software and the debug interface pin on the FTDI Vinculum-II (VNC2) USB host controller device. The VNC2 debug module consists of a miniature board with a USB miniB connector, which provides USB connectivity to Vinculum-II IDE development tools running on a PC. The VNC2 debug module can be used to program and debug firmware running on the VNC2 device. The module connects to the VNC2 device via a 6-way, 2mm pitch, keyed, female connector. The V2DIPx-x, VNC2 based development modules are equipped with a compatible male connector to host the VNC2 debug module. Designers intending to use the module with their own VNC2 based hardware are required to have a similar compatible male connector on their hardware. Details on the debug interface and connectors are outlined in subsequent sections of this document.