HARTING, D-Sub Standard Series, Female Crimp D-sub Connector Contact, PdNi Pin, 24 → 28 AWG
Tehnička dokumentacija
Tehnički podaci
Brand
HartingGender
Female
Wire Size
24 → 28 AWG
Contact Material
Brass
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.09mm²
Maximum Wire Size mm²
0.25mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.1mm
Minimum Wire Size AWG
28AWG
Maximum Wire Size AWG
24AWG
Zemlja podrijetla
Germany
Detalji o proizvodu
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 0,973
Each (In a Pack of 25) (bez PDV-a)
KM 1,138
Each (In a Pack of 25) (s PDV-om)
25
KM 0,973
Each (In a Pack of 25) (bez PDV-a)
KM 1,138
Each (In a Pack of 25) (s PDV-om)
25
Kupujte na veliko
| količina | Jedinična cijena | Po pakovanje |
|---|---|---|
| 25 - 75 | KM 0,973 | KM 24,33 |
| 100 - 225 | KM 0,952 | KM 23,79 |
| 250+ | KM 0,865 | KM 21,63 |
Tehnička dokumentacija
Tehnički podaci
Brand
HartingGender
Female
Wire Size
24 → 28 AWG
Contact Material
Brass
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.09mm²
Maximum Wire Size mm²
0.25mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.1mm
Minimum Wire Size AWG
28AWG
Maximum Wire Size AWG
24AWG
Zemlja podrijetla
Germany
Detalji o proizvodu
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807