ITT Cannon Trident Connector Black, Plastic

RS kataloški broj:: 273-5562robna marka: ITT CannonProizvođački broj:: TNA24CA02-26L / 192991-0013
brand-logo
View all in Heat Shrink Boots

Tehnička dokumentacija

Tehnički podaci

Type

Trident Connector

Adhesive Lined

No

Material

Plastic

Colour

Black

Standards Met

UL 94V-0

Series

Trident Neptune

Zemlja podrijetla

Hungary

Detalji o proizvodu

Rear Housing

Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets.

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 16,01

Each (bez PDV-a)

KM 18,73

Each (s PDV-om)

ITT Cannon Trident Connector Black, Plastic

KM 16,01

Each (bez PDV-a)

KM 18,73

Each (s PDV-om)

ITT Cannon Trident Connector Black, Plastic
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Type

Trident Connector

Adhesive Lined

No

Material

Plastic

Colour

Black

Standards Met

UL 94V-0

Series

Trident Neptune

Zemlja podrijetla

Hungary

Detalji o proizvodu

Rear Housing

Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets.

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.