ITT Cannon Dust Cap

RS kataloški broj:: 190-3424robna marka: ITT CannonProizvođački broj:: TNA24DCR0-02B / 192900-0383
brand-logo
Prikaži sve u Circular Connector Dust Caps

Tehnička dokumentacija

Tehnički podaci

Brand

ITT Cannon

Detalji o proizvodu

Dust Caps

Plastic dust-caps for plug and socket panel housings. Only the shell size is required to determine the correct cap. Caps include a plastic retaining strap.

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 30,281

Each (In a Bag of 100) (bez PDV-a)

KM 35,429

Each (In a Bag of 100) (s PDV-om)

ITT Cannon Dust Cap

100

Dostupno u više komada 100
100KM 3.028,06
200KM 6.056,12
300KM 9.084,18
400KM 12.112,24
500KM 15.140,30
600KM 18.168,36
700KM 21.196,42
800KM 24.224,48
900KM 27.252,54
1000KM 30.280,60
1100KM 33.308,66
1200KM 36.336,72
1300KM 39.364,78
1400KM 42.392,84
1500KM 45.420,90

KM 30,281

Each (In a Bag of 100) (bez PDV-a)

KM 35,429

Each (In a Bag of 100) (s PDV-om)

ITT Cannon Dust Cap
Informacije o stanju skladišta trenutno nisu dostupne.

100

Dostupno u više komada 100
100KM 3.028,06
200KM 6.056,12
300KM 9.084,18
400KM 12.112,24
500KM 15.140,30
600KM 18.168,36
700KM 21.196,42
800KM 24.224,48
900KM 27.252,54
1000KM 30.280,60
1100KM 33.308,66
1200KM 36.336,72
1300KM 39.364,78
1400KM 42.392,84
1500KM 45.420,90

Tehnička dokumentacija

Tehnički podaci

Brand

ITT Cannon

Detalji o proizvodu

Dust Caps

Plastic dust-caps for plug and socket panel housings. Only the shell size is required to determine the correct cap. Caps include a plastic retaining strap.

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.