KEMET Ferrite Flat Cable Ferrite, 20 max. wires, Solid Core, Inner dims. 27 x 1.5mm
Tehnička dokumentacija
Tehnički podaci
Brand
KEMETMaximum Number of Wires
20
Type
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
33.2 x 15 x 8mm
Inner Dimensions
27 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
27mm
Outer Depth
15mm
Outer Height
8mm
Outer Width
33.2mm
Detalji o proizvodu
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 7,765
Each (In a Bag of 5) (bez PDV-a)
KM 9,085
Each (In a Bag of 5) (s PDV-om)
5
KM 7,765
Each (In a Bag of 5) (bez PDV-a)
KM 9,085
Each (In a Bag of 5) (s PDV-om)
5
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Brand
KEMETMaximum Number of Wires
20
Type
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
33.2 x 15 x 8mm
Inner Dimensions
27 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
27mm
Outer Depth
15mm
Outer Height
8mm
Outer Width
33.2mm
Detalji o proizvodu
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda