Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
G 1/2 Female
Connector B
Push In 10 mm
Pneumatic Fitting Type
Straight Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
G 1/2 Female
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Mounting Type
Inline
Zemlja podrijetla
France
Detalji o proizvodu
Straight Adaptor - Female Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fittings are used to connect a pneumatic tube to a male thread and can be tightend using either a socket or spanner.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 38,759
Each (In a Pack of 2) (bez PDV-a)
KM 45,348
Each (In a Pack of 2) (s PDV-om)
2
KM 38,759
Each (In a Pack of 2) (bez PDV-a)
KM 45,348
Each (In a Pack of 2) (s PDV-om)
2
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
2 - 8 | KM 38,759 | KM 77,52 |
10+ | KM 38,11 | KM 76,22 |
Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
G 1/2 Female
Connector B
Push In 10 mm
Pneumatic Fitting Type
Straight Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
G 1/2 Female
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Mounting Type
Inline
Zemlja podrijetla
France
Detalji o proizvodu
Straight Adaptor - Female Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fittings are used to connect a pneumatic tube to a male thread and can be tightend using either a socket or spanner.