Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipIC Type
Transceiver IC
Data Rate
10 Mbps, 100 Mbps, 1000Mbps
Number of Transceivers
1
Standard Supported
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
56
Typical Operating Supply Voltage
2.25 to 2.75 V
Dimensions
8.15 x 8.15 x 0.95mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Detalji o proizvodu
LAN8820 10/100/1000 Ethernet Transceivers
Microchips LAN8820 is a Gigabit Ethernet Transceiver IC with a RGMII Interface that fully complies with IEEE 802.3 and 802.3ab. It contains a full-duplex transceiver for 1000Mbps operation and can be configured to communicate with an Ethernet MAC.
Also featured is HPs Auto MDIX, a technology that automatically correctly configures the device node when connected to another LAN device; this removes the need for specialised crossover cables.
Ethernet Communications - Microchip
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 21,41
Each (bez PDV-a)
KM 25,05
Each (s PDV-om)
1
KM 21,41
Each (bez PDV-a)
KM 25,05
Each (s PDV-om)
1
Kupujte na veliko
količina | Jedinična cijena |
---|---|
1 - 24 | KM 21,41 |
25+ | KM 21,09 |
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipIC Type
Transceiver IC
Data Rate
10 Mbps, 100 Mbps, 1000Mbps
Number of Transceivers
1
Standard Supported
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
56
Typical Operating Supply Voltage
2.25 to 2.75 V
Dimensions
8.15 x 8.15 x 0.95mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Detalji o proizvodu
LAN8820 10/100/1000 Ethernet Transceivers
Microchips LAN8820 is a Gigabit Ethernet Transceiver IC with a RGMII Interface that fully complies with IEEE 802.3 and 802.3ab. It contains a full-duplex transceiver for 1000Mbps operation and can be configured to communicate with an Ethernet MAC.
Also featured is HPs Auto MDIX, a technology that automatically correctly configures the device node when connected to another LAN device; this removes the need for specialised crossover cables.