Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipPhysical Network Type
100BaseTX, 10BaseT
Host Interface
Host Bus
IC Type
Controller IC
Network Interface
MDI, MDIX, MII, RMII
Communication Mode
Full Duplex, Half Duplex
Data Rate
100Mbps
Loopback Mode
Internal
Standard Supported
ANSI X3.263, IEEE 802.3, IEEE 802.3u
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
64
Auto-Negotiation
Yes
DMA Support
Yes
Typical Operating Supply Voltage
3.3 V
Dimensions
9 x 9 x 0.95mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Detalji o proizvodu
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
Ethernet Communications - Microchip
€ 4.937,40
€ 18,99 komadno (na ploči od 260) (bez PDV-a)
€ 5.776,76
€ 22,218 komadno (na ploči od 260) (s PDV-om)
260
€ 4.937,40
€ 18,99 komadno (na ploči od 260) (bez PDV-a)
€ 5.776,76
€ 22,218 komadno (na ploči od 260) (s PDV-om)
260
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipPhysical Network Type
100BaseTX, 10BaseT
Host Interface
Host Bus
IC Type
Controller IC
Network Interface
MDI, MDIX, MII, RMII
Communication Mode
Full Duplex, Half Duplex
Data Rate
100Mbps
Loopback Mode
Internal
Standard Supported
ANSI X3.263, IEEE 802.3, IEEE 802.3u
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
64
Auto-Negotiation
Yes
DMA Support
Yes
Typical Operating Supply Voltage
3.3 V
Dimensions
9 x 9 x 0.95mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Detalji o proizvodu
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.