MikroElektronika MIKROE-1993, 7x10 R Click LED Matrix Display Add On Board With 74HC595

RS kataloški broj:: 136-0764robna marka: MikroElektronikaProizvođački broj:: MIKROE-1993
brand-logo
Prikaži sve u Display Development Tools

Tehnička dokumentacija

Tehnički podaci

Display Technology

LED Matrix Display

Kit Classification

Add On Board

Featured Device

74HC595

Kit Name

7x10 R Click

Detalji o proizvodu

7x10 R Click mikroBUS™

A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The 7x10 R click has a matrix of 70 red LEDs driven by a pairs of 8-bit serial-in, parallel-out shift registers, a Darlington transistor array and a Johnson counter. The 7x10 click can be used to display two ASCII characters in standard 7x5 format and communicates with the target microcontroller through the mikroBUS™ SPI interface. The Click board requires a 3.3 or 5V power supply.

Click mikroBUS™ Display & Graphics Boards

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 52,45

Each (bez PDV-a)

KM 61,37

Each (s PDV-om)

MikroElektronika MIKROE-1993, 7x10 R Click LED Matrix Display Add On Board With 74HC595

KM 52,45

Each (bez PDV-a)

KM 61,37

Each (s PDV-om)

MikroElektronika MIKROE-1993, 7x10 R Click LED Matrix Display Add On Board With 74HC595
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Display Technology

LED Matrix Display

Kit Classification

Add On Board

Featured Device

74HC595

Kit Name

7x10 R Click

Detalji o proizvodu

7x10 R Click mikroBUS™

A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The 7x10 R click has a matrix of 70 red LEDs driven by a pairs of 8-bit serial-in, parallel-out shift registers, a Darlington transistor array and a Johnson counter. The 7x10 click can be used to display two ASCII characters in standard 7x5 format and communicates with the target microcontroller through the mikroBUS™ SPI interface. The Click board requires a 3.3 or 5V power supply.

Click mikroBUS™ Display & Graphics Boards