MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

RS kataloški broj:: 136-0780robna marka: MikroElektronikaProizvođački broj:: MIKROE-2040
brand-logo
Prikaži sve u LED Development Tools

Tehnička dokumentacija

Tehnički podaci

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Detalji o proizvodu

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 34,61

Each (bez PDV-a)

KM 40,49

Each (s PDV-om)

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

KM 34,61

Each (bez PDV-a)

KM 40,49

Each (s PDV-om)

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Detalji o proizvodu

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards