Tehnička dokumentacija
Tehnički podaci
Brand
MurataSeries
DLP2AD
Impedance
90 Ω
Test Frequency
100 MHz
DC Resistance
1.4Ω
Maximum Current
120 mA
Dimensions
2 x 1 x 0.82mm
Operating Temperature Range
-40°C → +85°C
Number of Lines
4
Mounting Type
Surface Mount
Termination Style
Solder Pad
Package/Case
2010 (5025M)
Minimum Operating Temperature
-40°C
Length
2mm
Height
0.82mm
Maximum Operating Temperature
+85°C
Depth
1mm
Zemlja podrijetla
Japan
Detalji o proizvodu
Murata 0804 DLP2ADA Series Common Mode Choke Coil Arrays
DLP2ADA common mode chokes from Murata are a compact, low profile solution. With a height of only 0.82 mm, these common mode chokes are constructed from two 2.0 x 1.00 mm size components and ideal for mobile equipment. The tight terminal pitch enables high mounting density, while the ability to match line impedance ensure a good transmission of high-speed signals.
Murata SMD Common Mode Chokes
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 1,168
Each (In a Pack of 10) (bez PDV-a)
KM 1,367
Each (In a Pack of 10) (s PDV-om)
Standard
10
KM 1,168
Each (In a Pack of 10) (bez PDV-a)
KM 1,367
Each (In a Pack of 10) (s PDV-om)
Standard
10
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
10 - 40 | KM 1,168 | KM 11,68 |
50 - 90 | KM 1,017 | KM 10,17 |
100 - 240 | KM 0,93 | KM 9,30 |
250 - 990 | KM 0,844 | KM 8,44 |
1000+ | KM 0,80 | KM 8,00 |
Tehnička dokumentacija
Tehnički podaci
Brand
MurataSeries
DLP2AD
Impedance
90 Ω
Test Frequency
100 MHz
DC Resistance
1.4Ω
Maximum Current
120 mA
Dimensions
2 x 1 x 0.82mm
Operating Temperature Range
-40°C → +85°C
Number of Lines
4
Mounting Type
Surface Mount
Termination Style
Solder Pad
Package/Case
2010 (5025M)
Minimum Operating Temperature
-40°C
Length
2mm
Height
0.82mm
Maximum Operating Temperature
+85°C
Depth
1mm
Zemlja podrijetla
Japan
Detalji o proizvodu
Murata 0804 DLP2ADA Series Common Mode Choke Coil Arrays
DLP2ADA common mode chokes from Murata are a compact, low profile solution. With a height of only 0.82 mm, these common mode chokes are constructed from two 2.0 x 1.00 mm size components and ideal for mobile equipment. The tight terminal pitch enables high mounting density, while the ability to match line impedance ensure a good transmission of high-speed signals.