Murata MGK Non-Isolated DC-DC Converter, 1.8V dc/ 20A Output, 8 → 14 V dc Input, 36W, Surface Mount, +85°C Max

RS kataloški broj:: 135-9192robna marka: MurataProizvođački broj:: MYMGK1R820ERSR
brand-logo
Prikaži sve u DC-DC Converters

Tehnička dokumentacija

Tehnički podaci

Brand

Murata

Output Voltage

1.8V dc

Input Voltage Range

8 → 14 V dc

Power Rating

36W

Input Voltage Nominal

12 V dc

Output Current

20A

Mounting Type

Surface Mount

Number of Outputs

1

Width

9mm

Depth

5.6mm

Length

10.5mm

Series

MGK

Load Regulation

±1%

Minimum Temperature

-40°C

Efficiency

87.8%

Maximum Temperature

+85°C

Standards Met

CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1

Detalji o proizvodu

Murata Mono Block 20A DC-DC Converter

The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

P.O.A.

Murata MGK Non-Isolated DC-DC Converter, 1.8V dc/ 20A Output, 8 → 14 V dc Input, 36W, Surface Mount, +85°C Max
Odaberite vrstu pakovanja

Odaberite vrstu pakovanja

Standard - each

Dostupno u više komada 1.

Proizvodnja -

Dostupno u više komada 1.

Preporuča se za narudžbu u velikim količinama. Predmeti su pakirani spremni za umetanje u strojeve, omogućujući vam da poboljšate učinkovitost proizvodnje.

1

Dostupno u više komada 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

Murata MGK Non-Isolated DC-DC Converter, 1.8V dc/ 20A Output, 8 → 14 V dc Input, 36W, Surface Mount, +85°C Max
Informacije o stanju skladišta trenutno nisu dostupne.
Odaberite vrstu pakovanja

Odaberite vrstu pakovanja

Standard - each

Dostupno u više komada 1.

Proizvodnja -

Dostupno u više komada 1.

Preporuča se za narudžbu u velikim količinama. Predmeti su pakirani spremni za umetanje u strojeve, omogućujući vam da poboljšate učinkovitost proizvodnje.

1

Dostupno u više komada 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Brand

Murata

Output Voltage

1.8V dc

Input Voltage Range

8 → 14 V dc

Power Rating

36W

Input Voltage Nominal

12 V dc

Output Current

20A

Mounting Type

Surface Mount

Number of Outputs

1

Width

9mm

Depth

5.6mm

Length

10.5mm

Series

MGK

Load Regulation

±1%

Minimum Temperature

-40°C

Efficiency

87.8%

Maximum Temperature

+85°C

Standards Met

CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1

Detalji o proizvodu

Murata Mono Block 20A DC-DC Converter

The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više