Murrelektronik Limited EMPARRO Switched Mode DIN Rail Power Supply, 230V ac, 24V dc dc Output, 20A Output, 480W

RS kataloški broj:: 123-6697robna marka: Murrelektronik LimitedProizvođački broj:: 85442
brand-logo
Prikaži sve u DIN Rail Power Supplies

Tehnička dokumentacija

Tehnički podaci

Series

EMPARRO

Type

Switched Mode

Electrical Phase

1

Number of Outputs

1

Input Voltage

230V ac

AC or DC Output Voltage

dc

Output Voltage

24V dc

Output Current

20A

Power Rating

480W

Dimensions

123 x 85 x 138mm

Width

85mm

Depth

138mm

Height

123mm

Minimum Temperature

-25°C

Ripple And Noise

50mV ac

MTBF

>500000h

Mounting Type

DIN Rail Mount

Output Voltage Adjustment Range

24 → 28V

Special Features

Efficient, Reliable, Rugged

Maximum Temperature

+60°C

Standards Met

cULus, cULus Recognised, DNC, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, GL, SEMI F47

Zemlja podrijetla

Czech Republic

Detalji o proizvodu

Emparro Power Supply 1 and 3 Phase

Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.

Switch Mode - Murrelektronik

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 1.101,98

KM 1.101,98 Each (bez PDV-a)

KM 1.289,32

KM 1.289,32 Each (s PDV-om)

Murrelektronik Limited EMPARRO Switched Mode DIN Rail Power Supply, 230V ac, 24V dc dc Output, 20A Output, 480W

KM 1.101,98

KM 1.101,98 Each (bez PDV-a)

KM 1.289,32

KM 1.289,32 Each (s PDV-om)

Murrelektronik Limited EMPARRO Switched Mode DIN Rail Power Supply, 230V ac, 24V dc dc Output, 20A Output, 480W
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Series

EMPARRO

Type

Switched Mode

Electrical Phase

1

Number of Outputs

1

Input Voltage

230V ac

AC or DC Output Voltage

dc

Output Voltage

24V dc

Output Current

20A

Power Rating

480W

Dimensions

123 x 85 x 138mm

Width

85mm

Depth

138mm

Height

123mm

Minimum Temperature

-25°C

Ripple And Noise

50mV ac

MTBF

>500000h

Mounting Type

DIN Rail Mount

Output Voltage Adjustment Range

24 → 28V

Special Features

Efficient, Reliable, Rugged

Maximum Temperature

+60°C

Standards Met

cULus, cULus Recognised, DNC, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, GL, SEMI F47

Zemlja podrijetla

Czech Republic

Detalji o proizvodu

Emparro Power Supply 1 and 3 Phase

Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.

Switch Mode - Murrelektronik