Take Up Bearing Unit, ST40, 40mm ID

RS kataloški broj:: 244-0775robna marka: NSK-RHPProizvođački broj:: ST40
brand-logo
Prikaži sve u Bearing Units

Tehnička dokumentacija

Tehnički podaci

Brand

NSK-RHP

Inside Diameter

40mm

Bearing Unit Type

Take Up Bearing Unit

Material

Cast Iron

Length

143.5mm

Width

118mm

Depth

49.5mm

Detalji o proizvodu

Self Lube Bearing Take-Up Unit

Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.

Supplied with

grease nipples

Bearing Take-Up Units

Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 279,01

Each (bez PDV-a)

KM 326,44

Each (s PDV-om)

Take Up Bearing Unit, ST40, 40mm ID

1

Dostupno u više komada 1
1KM 279,01
2KM 558,03
3KM 837,04
4KM 1.116,06
5KM 1.362,63
6KM 1.635,15
7KM 1.907,68
8KM 2.180,20
9KM 2.452,73
10KM 2.725,25
11KM 2.997,78
12KM 3.270,30
13KM 3.542,83
14KM 3.815,36
15KM 4.087,88

KM 279,01

Each (bez PDV-a)

KM 326,44

Each (s PDV-om)

Take Up Bearing Unit, ST40, 40mm ID
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1KM 279,01
2KM 558,03
3KM 837,04
4KM 1.116,06
5KM 1.362,63
6KM 1.635,15
7KM 1.907,68
8KM 2.180,20
9KM 2.452,73
10KM 2.725,25
11KM 2.997,78
12KM 3.270,30
13KM 3.542,83
14KM 3.815,36
15KM 4.087,88

Kupujte na veliko

količinaJedinična cijena
1 - 4KM 279,01
5+KM 272,53

Tehnička dokumentacija

Tehnički podaci

Brand

NSK-RHP

Inside Diameter

40mm

Bearing Unit Type

Take Up Bearing Unit

Material

Cast Iron

Length

143.5mm

Width

118mm

Depth

49.5mm

Detalji o proizvodu

Self Lube Bearing Take-Up Unit

Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.

Supplied with

grease nipples

Bearing Take-Up Units

Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.