Tehnička dokumentacija
Tehnički podaci
Brand
onsemiDiode Configuration
Single
Direction Type
Uni-Directional
Minimum Breakdown Voltage
5.5V
Mounting Type
Surface Mount
Package Type
POWERMITE
Pin Count
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimum Operating Temperature
-40 °C
Dimensions
2.05 x 2.18 x 1.15mm
Maximum Operating Temperature
+150 °C
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Length
2.05mm
Height
1.15mm
Width
2.18mm
Test Current
1A
Detalji o proizvodu
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.
Transient Voltage Suppressors, ON Semiconductor
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 1,622
Each (Supplied as a Tape) (bez PDV-a)
KM 1,898
Each (Supplied as a Tape) (s PDV-om)
Standard
10
KM 1,622
Each (Supplied as a Tape) (bez PDV-a)
KM 1,898
Each (Supplied as a Tape) (s PDV-om)
Standard
10
Kupujte na veliko
količina | Jedinična cijena | Po traka |
---|---|---|
10 - 20 | KM 1,622 | KM 16,22 |
30 - 140 | KM 1,557 | KM 15,57 |
150 - 740 | KM 1,103 | KM 11,03 |
750 - 1490 | KM 1,081 | KM 10,81 |
1500+ | KM 0,865 | KM 8,65 |
Tehnička dokumentacija
Tehnički podaci
Brand
onsemiDiode Configuration
Single
Direction Type
Uni-Directional
Minimum Breakdown Voltage
5.5V
Mounting Type
Surface Mount
Package Type
POWERMITE
Pin Count
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimum Operating Temperature
-40 °C
Dimensions
2.05 x 2.18 x 1.15mm
Maximum Operating Temperature
+150 °C
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Length
2.05mm
Height
1.15mm
Width
2.18mm
Test Current
1A
Detalji o proizvodu
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.