Parker Hydraulic End Sleeve TXS12

RS kataloški broj:: 302-8196robna marka: ParkerProizvođački broj:: TXS12
brand-logo
Prikaži sve u Hydraulic Fittings

Tehnička dokumentacija

Tehnički podaci

Brand

Parker

Hydraulic Fitting Type

Hydraulic End Sleeve

Material

Steel

Finish

Zinc Plated

Maximum Operating Pressure

350bar

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+120°C

Detalji o proizvodu

End Sleeve

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

P.O.A.

Parker Hydraulic End Sleeve TXS12

P.O.A.

Parker Hydraulic End Sleeve TXS12
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Brand

Parker

Hydraulic Fitting Type

Hydraulic End Sleeve

Material

Steel

Finish

Zinc Plated

Maximum Operating Pressure

350bar

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+120°C

Detalji o proizvodu

End Sleeve

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.