Phoenix Contact MKDS 1/ 2-3.5 HT BK Series PCB Terminal Block, 2-Contact, 3.5mm Pitch, Through Hole Mount, 1-Row,
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactNumber Of Contacts
2
Pitch
3.5mm
Number Of Rows
1
Mounting Type
Through Hole
Gender
Female
Termination Method
Solder
Current Rating
13.5A
Body Orientation
Horizontal
Colour
Black
Voltage Rating
300 V
Series
MKDS 1/ 2-3.5 HT BK
Length
7.3mm
Material
Nylon
Width
7.5mm
Zemlja podrijetla
Germany
Detalji o proizvodu
Phoenix Contact COMBICON MKDS 3.5mm High Temperature PCB Terminal Block
COMBICON MKD S PCB terminal blocks are reflow solder tolerable and enable a greater proportion of a PCB to be populated and reflow soldered in one operation. Before being used in reflow oven, it is recommended that these components are heat treated at +125°C for 48 hrs prior to use.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 19,47
KM 3,893 Each (In a Pack of 5) (bez PDV-a)
KM 22,78
KM 4,555 Each (In a Pack of 5) (s PDV-om)
5
KM 19,47
KM 3,893 Each (In a Pack of 5) (bez PDV-a)
KM 22,78
KM 4,555 Each (In a Pack of 5) (s PDV-om)
5
Kupujte na veliko
| količina | Jedinična cijena | Po pakovanje |
|---|---|---|
| 5 - 120 | KM 3,893 | KM 19,47 |
| 125 - 370 | KM 3,569 | KM 17,84 |
| 375 - 995 | KM 3,309 | KM 16,55 |
| 1000 - 1995 | KM 3,028 | KM 15,14 |
| 2000+ | KM 2,898 | KM 14,49 |
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactNumber Of Contacts
2
Pitch
3.5mm
Number Of Rows
1
Mounting Type
Through Hole
Gender
Female
Termination Method
Solder
Current Rating
13.5A
Body Orientation
Horizontal
Colour
Black
Voltage Rating
300 V
Series
MKDS 1/ 2-3.5 HT BK
Length
7.3mm
Material
Nylon
Width
7.5mm
Zemlja podrijetla
Germany
Detalji o proizvodu
Phoenix Contact COMBICON MKDS 3.5mm High Temperature PCB Terminal Block
COMBICON MKD S PCB terminal blocks are reflow solder tolerable and enable a greater proportion of a PCB to be populated and reflow soldered in one operation. Before being used in reflow oven, it is recommended that these components are heat treated at +125°C for 48 hrs prior to use.