Phoenix Contact 3RS7025 Series Signal Conditioner, Thermocouple Input, Current, Voltage Output, 9.6 → 30V dc
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactModule Type
Temperature Converter
Input Signal Type
Thermocouple
Output Signal Type
Current, Voltage
Input Range
-250 → +2500°C
Output Range
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Supply Voltage
9.6 → 30V dc
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Series
3RS7025
Maximum Operating Temperature
+65°C
Termination
Screw
Minimum Operating Temperature
-20°C
Distrelec Product Id
30061862
Zemlja podrijetla
Germany
Detalji o proizvodu
Configurable All Type Thermocouple Transducer
Configurable 3-way isolated temperature transducer. The device is suitable for the connection of thermocouples. The measured values are converted into a linear current or voltage signal.
The device can either be configured via DIP switches or, with extended functionality, via the S port using the software (FDT/ DTM).
The device supports fault monitoring.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 725,78
Each (bez PDV-a)
KM 849,16
Each (s PDV-om)
1
KM 725,78
Each (bez PDV-a)
KM 849,16
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactModule Type
Temperature Converter
Input Signal Type
Thermocouple
Output Signal Type
Current, Voltage
Input Range
-250 → +2500°C
Output Range
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Supply Voltage
9.6 → 30V dc
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Series
3RS7025
Maximum Operating Temperature
+65°C
Termination
Screw
Minimum Operating Temperature
-20°C
Distrelec Product Id
30061862
Zemlja podrijetla
Germany
Detalji o proizvodu
Configurable All Type Thermocouple Transducer
Configurable 3-way isolated temperature transducer. The device is suitable for the connection of thermocouples. The measured values are converted into a linear current or voltage signal.
The device can either be configured via DIP switches or, with extended functionality, via the S port using the software (FDT/ DTM).
The device supports fault monitoring.