Phoenix Contact D-ST Series End Cover for Use with DIN Rail Terminal Blocks

RS kataloški broj:: 388-4637robna marka: Phoenix ContactProizvođački broj:: 3030417
brand-logo

Tehnička dokumentacija

Tehnički podaci

Accessory Type

End Cover

Series

D-ST

For Use With

DIN Rail Terminal Blocks

Zemlja podrijetla

Germany

Detalji o proizvodu

ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact

The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.

The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 2,769

Each (In a Pack of 5) (bez PDV-a)

KM 3,24

Each (In a Pack of 5) (s PDV-om)

Phoenix Contact D-ST Series End Cover for Use with DIN Rail Terminal Blocks

KM 2,769

Each (In a Pack of 5) (bez PDV-a)

KM 3,24

Each (In a Pack of 5) (s PDV-om)

Phoenix Contact D-ST Series End Cover for Use with DIN Rail Terminal Blocks
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cijenaPo pakovanje
5 - 20KM 2,769KM 13,84
25 - 45KM 2,682KM 13,41
50 - 245KM 2,639KM 13,19
250 - 495KM 2,379KM 11,90
500+KM 2,314KM 11,57

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Accessory Type

End Cover

Series

D-ST

For Use With

DIN Rail Terminal Blocks

Zemlja podrijetla

Germany

Detalji o proizvodu

ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact

The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.

The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više