PR Electronics 2 Channel Galvanic Barrier, Repeater power supply, Current, Voltage Input, Current, Voltage Output
Tehnička dokumentacija
Tehnički podaci
Brand
PR ElectronicsNumber of Channels
2
Module Type
Repeater power supply
Barrier Type
Galvanic Barrier
Output Signal Type
Current, Voltage
Input Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Safety Current Maximum
400mA
Safety Voltage Maximum
250 V ac
Series
5104A
Operating Temperature Range
-20 → +60°C
Zemlja podrijetla
Denmark
Detalji o proizvodu
PR Electronics 5104A Repeater/ Power Supply
PR Electronics 5104A repeater is a power supply and signal isolator for 2-wire transmitters. The 5104A signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
PR Electronics DIN Rail Mounting
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Brand
PR ElectronicsNumber of Channels
2
Module Type
Repeater power supply
Barrier Type
Galvanic Barrier
Output Signal Type
Current, Voltage
Input Signal Type
Current, Voltage
Supply Voltage
19.2 → 300 V dc, 21.6 → 253V ac
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Safety Current Maximum
400mA
Safety Voltage Maximum
250 V ac
Series
5104A
Operating Temperature Range
-20 → +60°C
Zemlja podrijetla
Denmark
Detalji o proizvodu
PR Electronics 5104A Repeater/ Power Supply
PR Electronics 5104A repeater is a power supply and signal isolator for 2-wire transmitters. The 5104A signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
PR Electronics DIN Rail Mounting