RS PRO Blue Low-Density Polyethylene Solder Sleeve 29.3mm Length 2.3 → 4.5mm Cable Diameter
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProMinimum Cable Diameter
2.3mm
Maximum Cable Diameter
4.5mm
Sleeve Length
29.3mm
Material
Low-Density Polyethylene
Dielectric Strength
1kV
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Blue
Series
GAST
Shrink Temperature
>115°C
Standards Met
RoHS Compliant
Zemlja podrijetla
China
Detalji o proizvodu
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 175,19
1 Bag of 100 (bez PDV-a)
KM 204,97
1 Bag of 100 (s PDV-om)
1
KM 175,19
1 Bag of 100 (bez PDV-a)
KM 204,97
1 Bag of 100 (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cijena |
|---|---|
| 1 - 4 | KM 175,19 |
| 5 - 49 | KM 168,71 |
| 50+ | KM 161,14 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProMinimum Cable Diameter
2.3mm
Maximum Cable Diameter
4.5mm
Sleeve Length
29.3mm
Material
Low-Density Polyethylene
Dielectric Strength
1kV
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Blue
Series
GAST
Shrink Temperature
>115°C
Standards Met
RoHS Compliant
Zemlja podrijetla
China
Detalji o proizvodu
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.