RS PRO Thermal Interface Pad, 0.127mm Thick, 2.5W/m·K, 14.3 x 21mm
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProDimensions
14.3 x 21mm
Thickness
0.127mm
Length
14.3mm
Width
21mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 2,314
Each (In a Pack of 10) (bez PDV-a)
KM 2,707
Each (In a Pack of 10) (s PDV-om)
10
KM 2,314
Each (In a Pack of 10) (bez PDV-a)
KM 2,707
Each (In a Pack of 10) (s PDV-om)
10
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProDimensions
14.3 x 21mm
Thickness
0.127mm
Length
14.3mm
Width
21mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.