Sensata / Crydom Solid State Contactor, 2NO

RS kataloški broj:: 822-9375robna marka: Sensata / CrydomProizvođački broj:: DRC3R48B420
brand-logo
Prikaži sve u Contactors

Tehnička dokumentacija

Tehnički podaci

Normal State Configuration

2NO

Terminal Type

Screw

Length

45.31mm

Width

86.71mm

Depth

96.02mm

Load Voltage

48 V ac → 510V ac

Minimum Operating Temperature

-30°C

Input Current

7.5 mA → 13mA

Load Current

7.6A

Pole and Throw Configuration

3P

Mounting Style

DIN Rail Mount

Control Voltage

90 V ac → 140 V ac

Maximum Operating Temperature

+80°C

Zemlja podrijetla

Mexico

Detalji o proizvodu

Crydom DRC Series Solid State Contactors

Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.

Solid State Contactors

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

KM 763,50

Each (bez PDV-a)

KM 893,30

Each (s PDV-om)

Sensata / Crydom Solid State Contactor, 2NO

KM 763,50

Each (bez PDV-a)

KM 893,30

Each (s PDV-om)

Sensata / Crydom Solid State Contactor, 2NO
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cijena
1 - 4KM 763,50
5+KM 735,39

Tehnička dokumentacija

Tehnički podaci

Normal State Configuration

2NO

Terminal Type

Screw

Length

45.31mm

Width

86.71mm

Depth

96.02mm

Load Voltage

48 V ac → 510V ac

Minimum Operating Temperature

-30°C

Input Current

7.5 mA → 13mA

Load Current

7.6A

Pole and Throw Configuration

3P

Mounting Style

DIN Rail Mount

Control Voltage

90 V ac → 140 V ac

Maximum Operating Temperature

+80°C

Zemlja podrijetla

Mexico

Detalji o proizvodu

Crydom DRC Series Solid State Contactors

Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.

Solid State Contactors